About
************************


Unlike the metal surfaces of a wood or plastic substrate that density, porosity and stability depends. It seems that almost did not finish or coating on the surface of a bad set should be without saying.

With an end result of the prepare the surface of the substrate. If a smooth surface detail, and then filled with sand, to fill the grain and is a type of fault. The best prepared on the surface of a bad outcome can not control.

The new stamp on the first layer of wood density and porosity and is equal to the difference. Forests and the construction of shelters for the grain to provide a basis for the application requires 2 May on the face of slow in the printing layer. If a seal of the surface area compared to buildings with little or no shows, the building of the hull, then a seal around the base year or to compensate for the lack of.

The agency or building wraps are a part of the surface, moisture resistance, durability and longevity of the coating. Transparent or translucent surface in the coating material and the construction of shelters for rich color. Clear Coatings, the structure, tone and grain of the wood, only to glow in the use of shelters are showing. Goss shelters or create clarity and elimination of the fog, or in respect of a semi-matte cream or a brightness change in the place of final interpretation.

In solid or opaque lacquer finish product of interpretation, and the hardness and endurance of the best qualities of impressions and shock resistance. (Look at the desired brightness or upper layer - Shield up, go down to see.)

With humidity and moisture and hardness of the coating porosity and thickness of the wood substrate for the construction of the required number of houses will have to dictate. If the layer thickness of not wearing a membrane and not the best moisture - proof coating can not be responsible.
When moisture resistance to at least one layer is always important to have more than just a good production. The construction of an additional layer of a sealant that is, include a building at the end, more than twice as high as the moisture